Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Micro lenses are spherical plano convex/biconvex lenses with diameters smaller than 4mm. These small lenses are designed for use in equipment and instruments that demand lighter and smaller footprint optics.
◦Spherical plano convex lenses are useful when parallel beams are converged or lights from sources are converted to parallel beams, i.e., at infinite conjugate ratios.
◦Spherical biconvex lenses are useful when lights from sources are converged or images are relayed to other optical systems, i.e., at unit conjugate ratios.
◦Since these lenses are designed at the wavelength 587.6nm (yellow helium line [d]), the focal lengths of them vary at other wavelengths.
▶In addition to our standard products listed on-line and in the catalog, custom products are available. Please contact our Sales Division for assistance with your request.
▶The micro lenses have spherical aberration and the focal length will vary depending on the wavelength. Please check the “wavelength characteristic of the focal length data” on “Technical Data” for the focal lengths of each wavelength.
▶The plano convex lenses are designed for parallel light to be incident to the convex surface. Using the lens in reverse may increase the spherical aberration and the focused spot may enlarge and the image will appear out of focus.
▶Transmissions losses due to reflection off the front and rear surfaces of the lens can be minimized by coating the surfaces. Consult our Sales Division for anti-reflection coatings suitable for your application.
|Material||LaSF9 SK2 BK7||Design Wavelength||587.6nm||Coating||Uncoated||Centration||＜3′||Surface Quality (Scratch-Dig)||40-20|