OptoSigma

MHM-30-R
Zoom

Precision 0.1mm thread pitch fine adjustment screw introduces high resolutions. It is thinner than MHG mounts.

◦ The C-shaped mounting frame facilitate close-proximity positioning of the optical passes.◦ The holders are thin which offer more adjustment space compared to the MHG series.
◦ Mirrors are held are three points along the side to distribute the stress on the mirror evenly.
◦ The use of retaining rings does not constrain the clear aperture. A large clear aperture can be obtained with reflected or transmitted light.

Guide

▶MHG-NL mirror holders can have locking mechanisms for adjustments screws. (W4001)
▶These holders can be mounted on separate post holders or M6 threaded posts.

Attention

▶The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (W4102)
▶ The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (W4010)

Outline Drawing

Zoom
Products

Part Number

PRICE(USD)

Stock

Qty

Add to Cart

MHM-30-R

NEW
RoHS  

CONTACT US

IN STOCK
Specifications

Compatible Optics Diameter

φ30mm

Compatible Optics Thickness

3 - 5mm

45 ° incident crossbeam

φ13.6mm (Optics condition; thickness 3 mm, refractive index 1.52)

Though hole

φ27mm

Number of Adjustment Axes

2 points

Adjustment Range /tilt

±3°

Adjustment Range /Rotation

±3°

Resolution /Tilt

about 0.15°/rotation

Resolution /Rotation

about 0.15°/rotation

Weight

0.064kg

Documents/Downloads

Part Number

Catalog PDF

dxf

STP

IGS

SAT

MHM-30-R

Related product