OptoSigma

  • HOME >
  • NEW PRODUCTS
Application Systems
A full lineup of optical fiber patch cables, designed for use with visible light through to infrared light.
Single-core optical fiber collimator
A fiber collimator array capable of 100ch or moreM
Fiber focusers consist of a GI lens with a base material machined to the desired diameter and length, mated to a single-mode optical fiber. They output more focused light than a...
A fiber focuser array capable of 100ch or more.
A component for combining optical fibers, featuring an adhesive-free structure using glass fusing technologyto allow multiple optical fibers to be bundled together and joined ef...
A fused bundle fiber that uses jacketing technology to bundle multiple optical fibers without the use of adhesive.
An adhesive-free optical connector made using glass fusing technology for flexibility with high power applications consisting of different fiber diameters.
Tapered optical fibers use optical fibers shaped with a large input diameter and small output diameter, to deliver a spot size that cannot be achieved by focusing with a lens. O...
Adapter for optical fiber connections.
Uses microfibers for outstanding cleaning results!
A beam collimation checker that can be used with low coherence light.
Optical System & Interferometers
A cube-like joint in which rods are mounted in four directions, and a gimballed mirror holder is arranged inside.
A cube-like joint in which rods are mounted in four directions.
A gimballed mirror holder that can be placed anywhere on the rod. It can reflect the light path at an arbitrary angle.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
It is a mirror holder for normal incidence placed at the end of the rod. Precise angle adjustment is possible with the kinematic mirror mount.
An adapter plate to convert P30 (Dia. 6mm rods, 30mm pitch between the rods) system into P16 (Dia. 4mm rods, 16mm pitch between the rods).
It is a part for attaching the cage system to the post stand and others.
It is a rod for configuring the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
It is a conversion adapter to attach an optics with an outer diameter smaller than the adaptive size of the holder.
It is a holder for incorporating the objective lens into the cage system.
This is the stage for installing the objective lens in the cage system and adjusting the focus.
It is a holder for incorporating the optical polarizer into the cage system.
It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.
It is a conversion adapter for attaching the objective lens to the XY lens holder.
It is a holder for incorporating a prism such as a cube beam splitter into the cage system.
A holder for incorporating the iris diaphragm into the cage system.
It is an adapter for attaching the C-mount camera and camera lens to C-mount Adapter Mount.
It is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the cage system.
It is a target plate used for optical axis adjustment of the cage system.
Optics & Optical Coatings
Cleaner to blows dust and dirt from optics with clean compressed gas.
Holders
Precision 0.1mm thread pitch fine adjustment screw introduces high resolutions. It is thinner than MHG mounts.
These are low outgassing mirror holders which are ideal for using in the high vacuum conditions.
These are low outgassing lens holders which are ideal for using in the high vacuum conditions.
These are stainless steel iris diaphragms which can change it's aperture size. It is mainly used for optical axis alignment of the laser beam and blocking the return light or st...
Bases
The TS Series provides sub-hertz vibration isolation across all six degrees of freedom. The inherent stiffness of the TS system imparts excellent directional and positional stab...
An elegant combination of high-value and high performance.
Our highest performance vibration isolation system utilizes independent isolation mechanisms for the horizontal and vertical axes.
Entry level optical bench provides a basic level of vibration isolation for non critical experiments.
OSDVID series are available in two versions: C type for cleans rooms and L type for laboratory settings.
These desktop vibration isolation untis are ideal for small optical systems and miroscopes
The OSDOTS series (Overhead Table Systems) is used for mounting vibration producing equipment above the laboratory bench. The height of shelf can be easily adjusted. Shelves can ...
Portable air compressors designed to be compact and quiet.
Solid aluminum baseplates.
These are low outgassing pedestal bases for vacuum mirror holders and lens holders.
Pedestal spacers for post holder to adjust the height of the optical axis of vacuum lens holders from 12.7mm to 15mm.
This is a clamping tool for fixing the vacuum pedestals onto a optical breadboard.
These are low outgassing posts which are ideal for using in the high vacuum conditions.
This is a post holder for adjusting optical axis height of the holders with vacuum posts.
This is a low outgassing stand base/clamp for fixing the post holders in the high vacuum chamber.
These are low outgassing stand clamps for fixing vacuum stand bases.
These are low outgassing base plates for fixing vacuum holders and vacuum stages in the optical baseplates.
These are low outgassing base clamps for fixing vacuum optical baseplates and vacuum base plate onto a breadboard in the high vacuum chamber.
These are low outgassing optical baseplates for installing optical system and positioning equipment in the high vacuum chamber.
This is a hexagon socket head cap screw with a vent hole.
This is a hexagon socket head cap screw with a vent hole.
This is an optional screw made of stainless steel which can be used for post holders or to joint another post.
This is a special tool for replace a adjustment screw with a electric actuators.
Screw sets frequently used to installOptoSigma products.
Manual Stages
Light weight aluminum dovetail slides with rack and pinion, suitable for frequent operations that require large motion and long travel.
Motorized Stages
Stepping motor driven stages, ideal for positioning of measuring instruments or inspection tools for which high stiffness and high precision are required.
Stepping motor driven stages, ideal for positioning of measuring instruments or inspection tools for which high stiffness and high precision are required.
Motorized crossed roller stages that combine compactness, low-profile and high durability.
High precision XY Zaxis stages fitted with precision ball screws and precision crossed roller.
High precision motorized goniometers with integrated bearing ways for superior stiffness, accuracy and durability.Their smooth motion makes them ideal for frequent angle adjustm...
CE-compliant compact motorized stages for use in high vacuum.It is a motorized stage suitable for experiments in a vac...
HSC-103 is designed to operate medium to high current 5-phase motor stages. The driver design reduces noise and vibration compared to older stepper motor drivers.
SGADVANCEE is software for making measurements and automatically collecting data by connecting to motorized positioning devices, measuring instruments, and controllers.
Light Sources & Laser Safety
The Helium Neon laser modules have a robust mechanical design, excellent beam quality and long service life of up to 20,000 hours. Standard and customized models are available i...
The Helium Neon laser modules have a robust mechanical design, excellent beam quality and long service life of up to 20,000 hours. Standard and customized models are available i...
* Label content is only available in Japanese.
SHLA Halogen fiber optic Illuminator.
Replacement Lamps for Tungsten Halogen Fiber Illumination Systems