OptoSigma

C-CGBH
Zoom

A cube-like joint in which rods are mounted in four directions, and a gimballed mirror holder is arranged inside.
By installing a beam splitter, you can construct a Michelson interferometer.

◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.

Related product
Products
Technical Data
Documents/Downloads
Guide

▶ Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog.
▶ For consultation of optical system using cage system please contact Sales.

Attention

▶ If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders.
▶ Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder.
▶ When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration.

Common Specifications
Primary materialAluminum
FinishBlack Anodized
Outline Drawing
■C30-CGBH-25.4

Zoom
Example of 3D configuration of the cage system

Zoom

Part Number

Catalog PDF

dxf

STP

IGS

SAT

C30-CGBH-25.4

Part Number
Guide Rod Diameter (Spaceing between rod) Compatible Optics Diameter Compatible Optics Thickness Clear Aperture Transmitted Beam Clear Aperture (45°Incidence) Adjustment Range /Tilt Adjustment Range /Rotation
Add to cart Cart
    PRICE(USD) Stock Qty
C30-CGBH-25.4

φ6mm (30x30mm)

φ25mm, φ25.4mm

1.5 - 5mm

φ22mm

φ10.8mm(at t=3mm)

±4°

360°

   

$210.00

IN STOCK