OptoSigma

C-SCMP
Zoom

It is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the cage system.

◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera.

Related product
Products
Technical Data
Documents/Downloads
Guide

▶ Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog.
▶ For consultation of optical system using cage system please contact Sales.

Attention

▶ If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders.
▶ Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder.
▶ When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration.

Common Specifications
Primary materialAluminum
FinishBlack Anodized
Outline Drawing
■C30-SCMP-H32

Zoom
How to fix side-in type holder plate

Zoom

①Rotate the holder plate using the rod as a fulcrum. (An arrow on the holder plate indicates the fulcrum)
②Make sure that the two rods fit into the end of the slot on the holder plate.
By tightening the set screws, the holder plate is fixed to the rod (cage).
③By attaching the fourth rod, it will be able to slide the holder plate along the rod without coming off.

Part Number

Catalog PDF

dxf

STP

IGS

SAT

C30-SCMP-H32

Part Number
Guide Rod Diameter (Spaceing between rod) Compatible Adapters Diameter Adjustment Range Installation
Add to cart Cart
    PRICE(USD) Stock Qty
C30-SCMP-H32

φ6mm (30x30mm)

φ30mm

±1mm

Slots fit from the side of rods

   

$23.00

LOW