OptoSigma

C-SMH/BP/SLFH
Zoom

It is a holder for incorporating optical elements such as lenses and filters into the cage system.

◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate of cage system has two types of addon methods which are side-in type and slide-in type. The side-in type can attach and detach the holder plate while the cage system are built. The slide-in type must be built in the cage system beforehand, but it is possible to firmly fix the holder plate to the cage (rod).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera.

Related product
Products
Technical Data
Documents/Downloads
Guide

▶ Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog.
▶ For consultation of optical system using cage system please contact Sales.

Attention

▶ If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders.
▶ Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder.
▶ When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration.

Common Specifications
Primary materialAluminum
FinishBlack Anodized
Outline Drawing
■C16-SMH-12.7

Zoom
■C16-SLFH-12.7

Zoom
■C16-SLFH-12.7A

Zoom
■C16-BP-25-12.7

Zoom
■C30-SMH-25.4

Zoom
■C30-SLFH-25.4

Zoom
■C30-SLFH-25.4A

Zoom
■C30-BP-40-25.4

Zoom
How to fix side-in type holder plate

Zoom

①Rotate the holder plate using the rod as a fulcrum. (An arrow on the holder plate indicates the fulcrum)
②Make sure that the two rods fit into the end of the slot on the holder plate.
By tightening the set screws, the holder plate is fixed to the rod (cage).
③By attaching the fourth rod, it will be able to slide the holder plate along the rod without coming off.
Spec
Compare
Part Number
Add to cart Cart
    PRICE(USD) Stock Qty
C16-SMH-12.7
C16-SLFH-12.7
C16-SLFH-12.7A
C16-BP-25-12.7
C30-SMH-25.4
C30-SLFH-25.4
C30-SLFH-25.4A
C30-BP-40-25.4

φ4mm (16x16mm)

φ12.7mm

3 - 6mm

φ10mm

Clamp the optics in between the retaining ring and the inner rim located at 1mm from end.

Slots fit from the side of rods

φ4mm (16x16mm)

φ12.7mm

- 3mm

φ10mm

Clamp the optics in between two retaining rings.

Slots fit from the side of rods

φ4mm (16x16mm)

φ12.7mm

- 6mm

φ10mm

Clamp the optics in between two retaining rings.

Slots fit from the side of rods

φ4mm (16x16mm)

φ12.7mm

- 3mm

φ10mm

Clamp the optics in between two retaining rings.

Slide from the end of rods

φ6mm (30x30mm)

φ25.4mm

3 - 8mm

φ22mm

Clamp the optics in between the retaining ring and the inner rim located at 1mm from end.

Slots fit from the side of rods

φ6mm (30x30mm)

φ25.4mm

- 6mm

φ22mm

Clamp the optics in between two retaining rings.

Slots fit from the side of rods

φ6mm (30x30mm)

φ25.4mm

- 12mm

φ22mm

Clamp the optics in between two retaining rings.

Slots fit from the side of rods

φ6mm (30x30mm)

φ25.4mm

- 6mm

φ22mm

Clamp the optics in between two retaining rings.

Slide from the end of rods

   

$18.00

CONTACT
US
   

$21.00

CONTACT
US
   

$24.00

LOW
   

$34.00

CONTACT
US
   

$20.00

IN STOCK
   

$20.00

IN STOCK
   

$27.00

CONTACT
US
   

$32.00

LOW