Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
It is a size conversion mount to be used when there is no proper type of optics diameter to be applied to a mirror holder.
The diameters of φ10, φ15, φ20 and φ25.4mm are converted to φ30mm.
The diameters of φ25、φ30、φ40mm are converted to φ50mm.
◦It can be used at the mirror holders of MHAN, MHA, LMHA, MHB, and LMHB.
◦For the types to be converted to φ30mm, screw has been carved in the adapter so that it can tighten the screw in the holder.
◦For the types to be converted to φ50mm, it can be tightened by retaining ring.
Mirrors can rotate 360 degrees in the pitch direction. Id...
Gimballed mirror mounts accessible from top. Mirror angle...
Gimballed mirror mounts to hold large diameter mirrors ov...
Top adjustment of these mirror mounts allow for devices t...
NOMI LOCKTM is the new locking mechanism from OptoSigma. ...
▶We can also offer the adapter mount for MHG holder (MHG-MAD). (W4004)
▶Adapter mounts other than standard sizes are also available, please contact our sales representative.
▶When the adapter mount is installed to the gimbaled mirror holder, the rotation center of the mirror holder is not coincide with the reflective surface of the mirror.
▶For a fixing the mirror, first, fixing the mirror into the adapter mount and then securing the adapter mount to the mirror holder.
Mirror can not be replaced in the state that the adapter mount is installed.
|Primary material||Aluminum||Finish||Black Anodized|