Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Precision 0.1mm thread pitch fine adjustment screw introduces high resolutions. It is thinner than MHG mounts.
◦ The C-shaped mounting frame facilitate close-proximity positioning of the optical passes.◦ The holders are thin which offer more adjustment space compared to the MHG series.
◦ Mirrors are held are three points along the side to distribute the stress on the mirror evenly.
◦ The use of retaining rings does not constrain the clear aperture. A large clear aperture can be obtained with reflected or transmitted light.
▶MHG-NL mirror holders can have locking mechanisms for adjustments screws. (W4001)
▶These holders can be mounted on separate post holders or M6 threaded posts.
▶The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (W4102)
▶ The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (W4010)
|Primary material||Aluminium||Finish||Black Anodized|