Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Half mirrors have an even 1:1 ratio of reflection and transmission in both linear polarized light and normal light source.
◦The reflection to transmission ratio is 1:1 regardless of the polarization condition from the input beam.
◦Depending on polarization, the reflection to transmission ratio of these products does not vary.
◦The laser lines listed correspond to various laser wavelengths.
◦Narrowband multi-layer AR coatings are applied to the four surfaces of the cube.
◦These cubes afe designed for a single wavelength because the effective bandwidth of a non-polarizing coating is narrow.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
▶Non-polarizing beam splitter (plate type) is also possible.
▶For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division.
▶Input beam from the prism side is indicated by a “○”.
▶Phase retardation of light input will not be preserved. Use a waveplate for phase compensation.
▶Wavelength dispersion of transmitted and reflected light is derived from refractive index and glass thickness and when diverging or introducing a focusing beam, chromatic aberration or spherical aberration may occur.
|Material||BK7 , Synthetic fused silica||Surface flatness of substrate||λ/4||Beam Deviation||＜5′||Coating||Hypotenuse surface ; Dielectric multilayer coating |
Four surfaces ; Multilayer antireflection coating
|Incident angle||0°||Divergence ratio |
(reflectance : transmittance)
|1 : 1||Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)||Surface Quality |
|20－10||Clear aperture||Circle that inscribed in a square of 85% of the dimensions |
(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)