Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Our highest performance vibration isolation system utilizes independent isolation mechanisms for the horizontal and vertical axes.
This system achieves the highest performance and efficiency for the most demanding applications.
◦This vibration isolator rapidly attenuates vibrations transmitted to mounted equipment and instruments, and is essential for equipment and instruments that are affected by vibration.
◦The bench is lightweight and has excellent stiffness due to the steel honeycomb core.
◦The top surface of the bench is made from a magnetic stainless steel with tapped holes (M6 25×25mm matrix).
◦The manual leveling system does not require a continuous air supply. The isolators can be pressurized with just a hand air pump.
▶We can produce sizes not listed in the catalog. Contact our Sales Division for more information.
▶When installed in locations with no air source, use the silent air compressor (OSDAC-30) which can be used indoors. (W6507)
▶The vibration isolator will perform the best when the load on the table is evenly distributed.
▶Freight is calculated seperately. Use the carry-in route and installation environment question sheet.(WEB Reference / Calalog Code W6001)
|Natural Frequency / Vertical Direction||about 1.2 – 1.5Hz||Natural Frequency / Horizontal Direction||about 1.5 – 1.7Hz||Vibration Isolation||Air Spring Isolations||Damping||Air Damping by Orifice||Honeycomb Material inside Bench||Plated steel honeycomb (0.25m foil, 3.2cm2 cell size)||Bench Material / Upper Plate||4.0mm thickness 430 series ferro magnetic stainless steel plate,smooth sanded finish||Bench Material / Lateral Side||2.0mm thickness carbon steel plate with damped wood composite, vinyl convert finish||Bench Material / Lower Plate||4.0mm thickness carbon steel plate epoxy painted finish||Bench Top Surface||M6 tapped holes on 25×25mm matrix over the entire surface (leaving 37.5mm around the edges)||Bench Top Surface Finish||Unpainted (smooth sanded finish)||Surface Flatness||±0.1mm over 600mm square||Hole/Core Sealing||Easy clean cylindrical cup (25mm deep)|