Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Manual cable release shutters enable triggering of shutters remotely introducing vibrations by touching the shutter itself. Appropriate for holograms or exposure of sensitive materials.
◦Shutter speed can be selected precisely in the range between 1/500 seconds to 1 second. Longer exposure is possible with the bulb or time function.
◦A 500mm release cable comes as an accessory.
◦All mechanical shutter requires no power to operate.
◦This shutter has a built-in aperture diameter control function.
▶Post length can be changed. If the length of post is specified at the time of purchase, this product will be delivered after replacing posts.
▶Automatic shutters (SSH) that provide complete remote control are also available.
▶To prepare the shutter for operation, it is necessary to wind the main spring with the set lever each time.
▶Do not use in high-power lasers. The blades might warp and not move.