Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
These electromagnetic shutters switch an optical path using a laser mirror for high power, and are compatible with high power pulse lasers. Selection of a wavelength that is a multiple of YAG laser frequency is possible.
◦Typical application is as external shutters used in experiments where stable laser oscillation is required.
◦When the power supply is cut off or the wiring is disconnected, laser light is shut off for safety.
◦While the shutter is closed, laser light is safely terminated by beam dumps.
▶We can make this product compatible with wavelengths or beam diameters not listed in the catalog.
▶Please order the dedicated shutter controller (SSH-C2B) along with this product.
▶The dedicate cable (SSH-CA2-LOAA) is not included. Please order the cable along with the controller.
▶Before ordering this product, please make sure that the energy density of your laser does not exceed the laser damage threshold.
▶Please always use this shutter unit with the dedicated controller.
Otherwise, these shutters may not operate properly.
▶When the shutter is closed, the sound of metal being hit might come out from the beam dumps. The sound is caused by a shock wave generated when laser light converts to heat on the metal surface. It is not the sound of a mirror breaking in the shutter unit.
▶The beam dumps might become very hot when a high power laser is used. Please be careful of burns.
|Primary material||Aluminum||Finish||Black Anodized|