Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Silver (Ag) coated mirrors have high reflectance over a broad range from visible to infrared wavelengths. Since it is coated with a protective layer on the silver, it can be used long-term without oxidation.
◦For the wavelength range from the visible to infrared, higher reflectance than aluminum mirror can be obtained.
◦Incident dependence is smaller than the dielectric multilayer coating, it can use at various incident angles.
◦Since it is coated by protective layer, a scratch hardly occurs even if it is rubbed with a cloth.
▶Please contact our Sales Division with your customized products requests.
▶For long-term storage, please use a de-oxidizer to prevent the oxidation of the silver.
▶When a laser is transmitted with multiple mirrors installed, there will be a loss of the amount of light caused by the absorption of the silver coating. Please use 0-45° Wide incidence dielectric mirrors (TFVM) for improved performance.
▶Reflectance specification is represented by the average of the reflectance of P polarized light and S polarized light. Reflectance may vary depending on the polarization state of the incident beam.
|Material||BK7||Coating||Ag+Dielectric Multi-layer Coating||Reflectance||R≧Ave.97.5％（450～2000nm） Ave. : Average||Surface flatness||λ/10||Parallelism||＜3′||Surface Quality (Scratch-Dig)||40-20||Clear aperture||Circle of 90% of the diameter or Circle that inscribed in a square of 90% of the dimensions|