Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Gold (Au) coated reflection mirrors have high reflectance over wide infrared range.
◦Chromium (Cr) is used as the undercoated to better reinforce the adhesion of gold to the substrate.
◦ Gold mirrors with silicon substrates have higher durability than glass because gold coating adheres much stronger to silicon and has a higher thermal conductivity. (thermal conductivity of silicon is 111 times better compared to glass)
▶Please contact our Sales Division for customized products. (customize outer diameter, etc.)
▶Pyrex® is a registered trademark of Corning Inc.
▶When silicon mirrors are water-cooled, heat dissipates more quickly and they have higher durability.
▶Since gold coating has an extremely low mechanical strength, extra care should be taken and it is recommended that cleaning of the surface be limited to blowing off the coated surface.
▶Reflectance of the specification are represented by the average of the reflectance of P polarized light and S polarized light.
Hard glass (Pyrex® etc.)
|Coating||Cr （Chromium）+Au（Gold）||Parallelism||＜3′||Surface Quality (Scratch-Dig)||40-20||Clear aperture||Circle of 90% of the diameter or Circle that inscribed in a square of 90% of the dimensions||Laser Damage Threshold||1.2kW/cm2 (CW laser)|