Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
The TS Series provides sub-hertz vibration isolation across all six degrees of freedom. The inherent stiffness of the TS system imparts excellent directional and positional stability, ensuring a stable and controlled measuring environment.
・Active Isolation from 0.7 Hz to 1,000 Hz
・Passive Isolation Beyond 1,000 Hz
・Isolates in all six degrees of freedom
・Internal feedback loop
・Easy to install and simple to use
◦Atomic Force Microscopes
◦Scanning Probe Microscopes
◦High Precision Metrology
|Isolation Range||Dynamic from 0.7 - 1000 Hz; Passive: >1000 Hz in all six degrees of freedom||Transmissibility||Adobe 10 Hz transmissibility < 0.01 (-40 dB)||System Noise||Less than 20nG/γHz from 0.1 - 200Hz||Static Compliance (per module): Vertical|
|Approx. 12 µm/N|
Approx. 30-40 µm/N
|Safety Class||1||Power Consumption||10 W typical / 50W Maximum (70VA)||Input Voltage||115 - 230 V AC 10%, 50 - 60 Hz||Monitor Signal||A multiplexed signal for display on oscilloscope shows sensor parts with and without isolation.||Material||Aluminum, Also available with ferromagnetic steel with drilled & tapped holes.|