Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
These lens holders are the thinnest to hold lenses.
The width of these holders are designed to be narrower than the diameter of lenses.
◦Optical systems which use lenses can be placed close to each other in parallel.
◦Please bring the plane side of a lens against the holder.
◦The simple fixation method makes replacement of lenses easy.
◦Can secure plano concave lenses with edge thickness of 1mm.
Used for height and rotational coarse/fine adjustment of ...
Used for height and rotational coarse adjustment of a pos...
Stainless steel posts. The RO model is fitted with an M6 ...
Stainless steel posts.
In case of using this rod, with...
▶We can change the post length. (If the length of post is specified at the time of purchase, this product will be delivered after replacing posts. Post replacement is free of charge, but please consult our International Sales Division because there may be extra charges due to differences in length.)
▶Tightening the lens retaining screws hard will bend these holders.
Please hold lenses lightly to the extent that they do not move.
▶Lenses may come off when these holders are used in environments subject to vibration or transported while lenses are mounted.
▶Cannot hold biconvex lenses which have short focal length.
|Primary material||Aluminum||Finish||Black Anodized|