Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Parabolic lens of internal reflection type is an optical element that, with incident lights from various directions reflected at the streamlined side surface, can collect the lights on the emitting end surface. It is used as a collector of solar cells.
◦With the parallel light of 25° or less as an incident angle it is possible to collect efficiently the light at the emitting end surface even though the incident from any directions occurs.
◦Since it is uses the internal reflection of the glass, the configuration is simplified compared with a lens system.
◦By using the press molding technique of the glass lens, it achieves both high performance and low cost.
▶It is available with anti-reflection coating on both end surfaces upon request.
▶Other sizes in addition to products listed on the website and in our catalog are available, please contact our Sales Division with your request.
▶Since it is totally reflected at the side (non-spherical), reflectance may be significantly worse if fingerprints and dirt are on that surface.
▶The transmittance of the side is 99% or more, but since anti-reflection coating is not applied in the incident surface and emitting surface, the reflection loss of about 4% occurs.
▶Light emitted from the end surface diverges largely and randomly without condensing to one point. Therefore, it should not be used for focused beam and collimated beam applications.
|Material||B270® (White Glass) equivalent|
|Allowable acceptance angle||25°|
|Surface Quality (Scratch-Dig)||Both end surfaces : 80-50|
Side surface (non-spherical) : 160-50
Parabolic Lens of Internal Reflection