SIGMAKOKI

Register


  • HOME >
  • NEW PRODUCTS
Application Systems
Configuration example for use with inverted microscope from Olympus (IX73 and IX83).
Configuration example for use with core unit microscope (CUS-BF, CUSmini-BF).
A lineup of products allows you to experience optical tweezers' experiments easily.
Configuration example for use with inverted microscope from Nikon (Ti2 series and Ti series).
The elastic modulus of the optical tweezers is easily determined by recorging the positional fluctuations of the captured beads with a high-speed camera and analyzing with a ded...
Configuration example for use with upright microscope from Olympus (BX series). Select products referring the product diagram. Please note that the microscope body is sold sepa...
The phase contrast inverted OUCI unit can observe the colorless and transparent sample by increasing the contrast using the refractive index difference between the sample and ba...
It is compatible with our observation unit with coaxial illumination (OUCI-2) and can be fixed in place.
An adapter to attach an observation system (OUCI-2 + DIMC) to the laser focusing lens.
A fiber collimator array capable of 100ch or moreM
A full lineup of optical fiber patch cables, designed for use with visible light through to infrared light.
Single-core optical fiber collimator
A fused bundle fiber that uses jacketing technology to bundle multiple optical fibers without the use of adhesive.
An adhesive-free optical connector made using glass fusing technology for flexibility with high power applications consisting of different fiber diameters.
A component for combining optical fibers, featuring an adhesive-free structure using glass fusing technologyto allow multiple optical fibers to be bundled together and joined ef...
A fiber focuser array capable of 100ch or more.
Fiber focusers consist of a GI lens with a base material machined to the desired diameter and length, mated to a single-mode optical fiber. They output more focused light than a...
Adapter for optical fiber connections.
A beam collimation checker that can be used with low coherence light.
Uses microfibers for outstanding cleaning results!
A beam collimation checker for small beam diameter UV light that can be used with low coherence light.
Tapered optical fibers use optical fibers shaped with a large input diameter and small output diameter, to deliver a spot size that cannot be achieved by focusing with a lens. O...
It is a high-performance microscope Raman spectroscopy device at a low price. We can respond flexibly to customer's needs, because we make software and hardware at our company.
Objective lens for vacuum with transparent hole.
Infinity corrected type lens tube with zoom.
Optical Cage Systems & Core Unit for Microscopy
It is a rod for configuring the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
A plate that holds the optics of dia. 12.7mm in the 16mm Cage assembly and enables coarse position adjustment (movable range dia.1mm) in the plane. Loosen the two screws of the ...
Cage Mounting Cube is used to fix cube type optics with 16mm compact cage system.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
It is a part for attaching the cage system to the post stand and others.
It is a mirror holder for normal incidence placed at the end of the rod. Precise angle adjustment is possible with the kinematic mirror mount.
Cage Blank Plate is used when the standard product listed on our web site cannot be fit with the customer's system.
It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.
It is a holder for incorporating a prism such as a cube beam splitter into the cage system.
It is a holder for incorporating the optical polarizer into the cage system.
It is a rod for configuring the cage system.
It is a target plate used for optical axis adjustment of the cage system.
Specially designed holder for Cage system, in which multiple filters are assembled to a revolver and inserted into the light path by rotating the revolver.
Mount directly on breadboard or vibration isolation table with C30-BMP.
A plate for fixing a post or pole to a 30mmCage assembly or mounting a 30mmCage assembly on a post.
It is a part for attaching the cage system to the post stand and compact Aluminum Rails others.
Used to extend a cage system in directions other than straight or right angles.
Platform for mounting stages and accessories with metric series mounting holes, fixed to a 30mm or 60mm Cage assembly.
An adapter that can be attached to the cube joint where the rods are mounted in four directions and an adapter that can be attached to the top or bottom of the joint.
A holder which can horizontally fix the 30mmCage assembly. The Cage assembly can be easily detached by loosening the clamping bolt.
A holder for incorporating the iris diaphragm into the cage system.
Optical components can be assembled with 30mm Cage system directly by using Cage M26.3*0.635 Plate.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
A cube-like joint in which rods are mounted in four directions, and a gimballed mirror holder is arranged inside.
There is a 30mm clear aperture at the center of Cage Through Hole Plate (C30-4RP-**) to assemble the Cage Through Hole Plate with cage system and there are also through holes to...
A plate for fixing to a vibration isolation table or breadboard with 25mm pitch M6 or 25.4mm pitch 1/4-20UNC screws to build a 30mm or 60mm Cage assembly vertically.
A plate directly fixes the collimating lens to the 30mm cage system. A375T / A355T (M9x0.5) and other standard screws are also supported.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
Plate converting P.C.D.50mm upper M4 screws to 15mm pitch M4 screws or 8-32UNC screws.
When the beam passes a plate type beamsplitter, the beam is shifted due to its thickness.
A plate that holds the optics of dia. 12.7mm in the 30mm Cage assembly and enables coarse position adjustment (movable range dia.1mm) in the plane. Loosen the two screws of the ...
Prism retainer is a component that can be used as a holder for fixing block-shaped optical elements such as cube beam splitters or prisms by fixing them to the screw holes. It i...
U-shaped platform for mounting stages and accessories to 30mmCage assemblies. The 30mmCage assemblies can also be fixed to a vibration isolation table or breadboard.
Cage Blank Plate is used when the standard product listed on our web site cannot be fit with the customer's system.
Cage Blank Plate is used when the standard product listed on our web site cannot be fit with the customer's system.
A gimballed mirror holder that can be placed anywhere on the rod. It can reflect the light path at an arbitrary angle.
It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.
It is a holder for incorporating the optical polarizer into the cage system.
Holder to integrate focusing lens or tube lens into the Cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
A holding plate that is more stable than standard post with fixing screws by clamping with the slotting and the bolts.
Tilt adjustment is added to Cage cross movement holder. It can be used as a device holder to adjust the positioning of the optics requires centering.
This is the stage for installing the objective lens in the cage system and adjusting the focus.
It is a holder for incorporating the objective lens into the cage system.
Holders for fixing square optics up to 4 to 16 mm in height and 5 mm in thickness. The upper and lower holder arms are covered with non-slip rubber sheets.
It is a conversion adapter to attach an optics with an outer diameter smaller than the adaptive size of the holder.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
It is a conversion adapter for attaching the objective lens to the XY lens holder.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
Lens holder of dia.25.4mm used in combination with the Cage focus stage.
It is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the cage system.
It is a target plate used for optical axis adjustment of the cage system.
Blank holder used in combination with the Cage focus stage. The point center mark at the center of the optical axis is a diameter of 2 mm as a reference for additional machining.
Cross motion holder used in combination with the Cage focus stage.
A holder for incorporating the iris diaphragm into the cage system.
Fixed C-mount holder to integrate an adapter-attached camera or camera lens into a cage system.
Specially designed holder for Cage system, in which multiple filters are assembled to a revolver and inserted into the light path by rotating the revolver.
C30-FS enables fine adjustment in the optical axis direction while assembling an objective lens adapter or a cross motion holder.
It is a holder for incorporating a prism such as a cube beam splitter into the cage system.
Objective lens adapter used in combination with the Cage focus stage.
It is an adapter for attaching the C-mount camera and camera lens to C-mount Adapter Mount.
Used to extend a cage system in directions other than straight or right angles.
It is a part for attaching the cage system to the post stand and compact Aluminum Rails others.
A plate for fixing to a vibration isolation table or breadboard with 25mm pitch M6 or 25.4mm pitch 1/4-20UNC screws to build a 30mm or 60mm Cage assembly vertically.
A holder which can horizontally fix the 32mmCage assembly. The Cage assembly can be easily detached by loosening the clamping bolt.
An adapter that can be attached to the cube joint where the rods are mounted in four directions and an adapter that can be attached to the top or bottom of the joint.
It is a mirror holder for normal incidence placed at the end of the rod. Precise angle adjustment is possible with the kinematic mirror mount.
Various accessories for C30 series available.
Plate converting P.C.D.50mm upper M4 screws to 15mm pitch M4 screws or 8-32UNC screws.
Prism retainer is a component that can be used as a holder for fixing block-shaped optical elements such as cube beam splitters or prisms by fixing them to the screw holes. It i...
A holder for incorporating the iris diaphragm into the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
It is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.
It is a holder for incorporating the optical polarizer into the cage system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
A cube-like joint in which rods are mounted in four directions, and a gimballed mirror holder is arranged inside.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
Specially designed holder for Cage system, in which multiple filters are assembled to a revolver and inserted into the light path by rotating the revolver.
A holding plate that is more stable than standard post with fixing screws by clamping with the slotting and the bolts.
An adapter that can be attached to the cube joint where the rods are mounted in four directions and an adapter that can be attached to the top or bottom of the joint.
It is a part for attaching the cage system to the post stand and compact Aluminum Rails others.
A holder which can horizontally fix the 60mmCage assembly to the post stand. The Cage assembly can be easily detached by loosening the clamping bolt.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
Mount directly on breadboard or vibration isolation table with C60-BMP.
Cage Blank Plate is used when the standard product listed on our web site cannot be fit with the customer's system.
It is a holder for incorporating optical elements such as lenses and filters into the cage system.
C30-REI-6 can be assembled to C60 series cage system with a 60mm pitch.
Optics holder for cube joint. An optics of dia. 50.8 can be attached with a cube joint (C60-CB-H50.8) and a joint adapter (C60-CBPK-**).
The optics holder (C60-CBOH-**) can be placed on a joint adapter (C60-CBPH-**) fixed to a cube joint (C60-CB-H50.8).
A plate to convert 16mm cage systems, 30mm cage systems and core units to each other.
Mechanical electromagnetic shutter to turn on and off the laser or to emit for a certain period of time remotely.
Accessories for easily attaching/detaching Cage cube joint or S cut with Cage assemblies. Use C30-CU-RTCA with a long thread when using the optics holder for S cube.
A designated controller and cable (cable length 2m) for remote operatable motor driven blade type automatic diaphragm.
Fixed holders to mount optics such as focusing lenseto Cage system.
It is a target plate used for optical axis adjustment of the cage system.
Holder to integrate focusing lens or other optics into the Cage system.
Motor driven diaphragm for remote operation.
Cage Rod Orthogonal adapter is used to assemble 16mm cage system with 30mm cage system which are in orthogonal. There are four through holes with diameter of 4mm on the front of...
A holding plate that is more stable than standard post with fixing screws by clamping with the slotting and the bolts.
An adapter plate to convert P30 (Dia. 6mm rods, 30mm pitch between the rods) system into P16 (Dia. 4mm rods, 16mm pitch between the rods).
Holders for fixing square optics up to 4 to 46 mm in height and 5 mm in thickness. The upper and lower holder arms are covered with non-slip rubber sheets.
0° incidence angle mirror holder for core unit system with 12.7mm diameter.
A plate to connect the core unit system to the 30mmCage system in a coaxial manner.
A diaphragm holder that can be shared with 30mmCage system and core unit.
Optics holder for dia. 50.8mm that can be shared with 60mmCage system and core unit.
Holder for holding the optics and fixing to the S cube
A plate connects the 16mm / 30mmCage system and core unit vertically from the core unit system.
Optics holder for dia. 12.7mm or 25.4mm that can be shared with 30mmCage system and core unit.
A blank plate that can be shared with 30mmCage system and core unit. The point center mark at the center of the optical axis is a diameter of dia. 2mm as a reference for additio...
A polarizer holder that can be shared with the 30mm Cage system and core unit.
A sample holder for the core unit system.
A stage mount base for the core unit that allows to mount a 25x25mm or 40x40mm size stage and an objective lens to achieve a compact sample observation unit.
An optics holder for dia.12.7mm that can be shared with the 16mm Cage system and the core unit.
It is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the core unit for microscopy
Multi-purpose holder that can be shared by 30mmCage system and core unit. Since the fixing screw is in 4 directions, it can be used as a holder of dia. 15mm or less or a simple ...
The stage to hold the sample and/or adujsting the sample position for Core Unit microscope standard model.
Σ cube core element to assemble Core Unit microscope. Peripheral elements for Σ cube are also available.
The elastic modulus of the optical tweezers is easily determined by recorging the positional fluctuations of the captured beads with a high-speed camera and analyzing with a ded...
A lineup of products allows you to experience optical tweezers' experiments easily.
The imaging unit for an infinity-corrected objective lens that combines a 200mm focal length imaging lens.
The lens hoder to be applied with Core Unit microscope.
Argo C-mount camera for CoreUnit microscope.
Core Unit elements to extend the function by jointing Core Unit microscope. They allow adjusting the optical axis height of the Core Unit elements or adapting to optical cage s...
Elements to be used with Core Unit microscope.
CUS-SET is a constucted and ready to use Core Unit Microscope.
It is a packaged items. You can use it by assembling it.
Optics & Optical Coatings
Mirrors for use in optical system of Yb pulsed laser with large energy. All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suita...
Designed specifically for fundamental and harmonic wavelengths of YAG and Fiber lasers.
It is high-power zoom Laser beam expander.
These laser beam expanders are designed for use with a high-power laser.
Cleaner to blows dust and dirt from optics with clean compressed gas.
Holders & Mounts
Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement ...
Precision 0.1mm thread pitch fine adjustment screw introduces high resolutions. It is thinner than MHG mounts.
Optics, such as filter can be fixed with lens holder by mounting the filter case on the lens holder.
Lens adapter to fix a small lens which diameter of φ5mm to φ8mm on the lens holder. The compatible optics diameter of the lens holder is 12.7mm.
Automatically rotating the polarizer (30mm outer diameter, 2.5-8.3mm thickness).
Automatically rotating the polarizing prism (25.4mm outer diameter).
Automatically rotating the variable reflective ND filter (VND-100 or VND-100U).
Mechanical electromagnetic shutter to turn on and off the laser or to emit for a certain period of time remotely.
These are low outgassing lens holders which are ideal for using in the high vacuum conditions.
These are stainless steel iris diaphragms which can change it's aperture size. It is mainly used for optical axis alignment of the laser beam and blocking the return light or st...
These are low outgassing mirror holders which are ideal for using in the high vacuum conditions.
Bases
Basic optical table with excellent cost performance, setting a compact aluminum honeycomb breadboard (FB) on a simple table frame.
PVT has uniform micrometers vent hole and can adsorb a sample reducing warp or deflection of the sample. PVT is suitable to fix a thin substrate such as semiconductor, glass, fi...
Stainless steel post with M6 screw at the tip and M6 screw hole at the bottom.
These are low outgassing pedestal bases for vacuum mirror holders and lens holders.
These are low outgassing posts which are ideal for using in the high vacuum conditions.
These are low outgassing stand clamps for fixing vacuum stand bases.
This is a post holder for adjusting optical axis height of the holders with vacuum posts.
Pedestal spacers for post holder to adjust the height of the optical axis of vacuum lens holders from 12.7mm to 15mm.
This is a clamping tool for fixing the vacuum pedestals onto a optical breadboard.
These are low outgassing base plates for fixing vacuum holders and vacuum stages in the optical baseplates.
These are low outgassing base clamps for fixing vacuum optical baseplates and vacuum base plate onto a breadboard in the high vacuum chamber.
This is a low outgassing stand base/clamp for fixing the post holders in the high vacuum chamber.
This is an optional screw made of stainless steel which can be used for post holders or to joint another post.
These are low outgassing optical baseplates for installing optical system and positioning equipment in the high vacuum chamber.
This is a hexagon socket head cap screw with a vent hole.
This is a special tool for replace a adjustment screw with a electric actuators.
This is a hexagon socket head cap screw with a vent hole.
Manual Stages
Dedicated controller that drives the piezo assist stage series. Lineup includes 1-axis type and 3-axis type.
X-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resol...
Light weight aluminum dovetail slides with rack and pinion, suitable for frequent operations that require large motion and long travel.
XY-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high reso...
Vertical mounting type Z-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems ...
Z-axis stage with Z bracket that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that req...
Actuators & Adjusters
A 2-axis controller for piezoelectric drive motors (PDM-**ACT).
Low outgas Ultrasonic Actuators for remote controlling in high vacuum chamber.
A small, high-resolution actuator that can be operated remotely. Installation compatibility with micrometers.
Motorized Stages
Stepping motor driven stages, ideal for positioning of measuring instruments or inspection tools for which high stiffness and high precision are required.
Small table size stage with stepping motor. The table size is 25x25mm. Ideal for production and experimental applications require significantly smaller size.
Stepping motor driven stages, ideal for positioning of measuring instruments or inspection tools for which high stiffness and high precision are required.
Motorized crossed roller stages that combine compactness, low-profile and high durability.
Small table size stage with stepping motor. The table size is φ25mm. Ideal for production and experimental applications require significantly smaller size.
Small table size stage with stepping motor. The table size is 25x25mm. Ideal for production and experimental applications require significantly smaller size.
Stepping motor driven goniometer with 25mm x 25mm table size.Significantly minimized body size and ideally suited for ...
High precision XY Zaxis stages fitted with precision ball screws and precision crossed roller.
High precision motorized goniometers with integrated bearing ways for superior stiffness, accuracy and durability.Their smooth motion makes them ideal for frequent angle adjustm...
CE-compliant compact motorized stages for use in high vacuum.It is a motorized stage suitable for experiments in a vac...
A single axis controller with built-in micro-step driver having a 5-point preset function.
HSC-103 is designed to operate medium to high current 5-phase motor stages. The driver design reduces noise and vibration compared to older stepper motor drivers.
FS-SPX is feedback stage with 5nm resolution positioning.
Dedicated controller for 5nm feedback stage (FS-SPX series) to control with 5nm resolution.
FS-UPX is feedback stage with 1nm resolution positioning.
FS-X is feedback stage with sub-micron resolution positioning..
FS-PX is feedback stage with 10nm resolution positioning.
Dedicated controller for 10nm feedback stage (FS-PX series) to control with 10nm resolution.
Dedicated controller for 1nm feedback stage (FS-UPX series) to control with 1nm resolution.
SGADVANCEE is software for making measurements and automatically collecting data by connecting to motorized positioning devices, measuring instruments, and controllers.
Dedicated cables for feedback stage system.
JC-01 is used by connecting the feedback controller of feedback stage(FS series).
Dedicated controller for sub micron feedback stage (FS-X series) to control with sub micron resolution.
Light Sources & Laser Safety
The laser module oscillates at 632.8nm and with linear polarization. It features high beam quality, low noise, high stability and long lifetime.
Power supply unit is exclusive for OSK series He-Ne laser and is complied with CDRH and IEC standard.
We have a lineup of a complete meter less memory stick size type laser power and energy meter and two types (for low power and high power) of laser power and energy meter connec...
Highly functional IR viewer using high quality converter.
A lightweight touch screen display which can measure various light sources such as laser to indicate light or energy.
* Label content is only available in Japanese.
SHLA Halogen fiber optic Illuminator.
Replacement Lamps for Tungsten Halogen Fiber Illumination Systems