Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
This is a beam expander for CO2 Laser (wavelength : 10.6μm) made of zinc selenide (ZnSe) lens. It will be used in laser marking system and so on.
◦Diopter correction function is provided, customer can fine-tune the collimated beam.
◦Because it is a beam expander type of the Galilean, it is compact and has good aberration characteristics.
◦Since the lens of zinc selenide has an anti-reflection coating, loss of light intensity is kept low.
Important： Treatment of ZnSe optics
ZnSe (Zinc selenide) is Poisonous and harmful substance classified as legal, depending on the specifications, the certificate of delivery may be required for acquisition of Poisonous and harmful substances. In addition, ZnSe Optics disposal after use is prohibited in general.
Lenses that are no longer needed, please return it to us.
However, we only take back products that we supplied. This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
▶It is not possible to obtain a decreased beam diameter by using the beam expander on the opposite side. Use it properly to obtain an adequate optical solution.
▶Make sure that the beam expander is well aligned with the laser light axis. If the beam expander is inclining, the output light will also be inclined.
|Material||Zinc selenide (ZnSe)|
|Coating||Dielectric multi-layer coating|