Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
These laser beam expanders are designed for use with a high-power laser. Fine adjustment of the collimator is available with the diopter correction function. The lens design takes into account the wavefront aberration, so it can be used in an optical system with high precision, such as a laser interferometer or laser processing.
◦The optical system of the beam expander utilizes an air gap configuration that does not use an adhesive bonding of lens.
◦By turning the diopter ring that is attached to the center of the beam expander, you can make variable beams such as a focused beam, collimated beam, and a divergent beam. It is used when you want to vary the position of the beam waist and where precision collimation adjustment is necessary.
▶We also can provide a holder for our laser beam expander (KLH-BE) for the fine adjustment with tilt angle and to secure the beam expander. W4147
▶It is also available to provide beam expander of wavelength other than products on-line and in our catalog and achromatic in two wavelengths or more.
▶It is not possible to create a collimated light obtained by reducing the beam diameter using in the opposite direction a beam expander. In this case, please use the appropriate optical system by determining the position of the beam waist and divergence angle of the laser beam.
|Lens Material||Synthetic fused silica|
|Configuration of lens||2 group 4plates Galilean|
|Housing Finish||Black Anodized|
|Coating||Antireflection coating (Design wavelength: 633nm)|
|A range of the length of lens barrel||±5mm|