Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
It is high-power zoom Laser beam expander.
It supports a broader wavelength range than the current models.
It can be used in an optical system with high precision, such as a laser interferometer and processing by the lens design that takes into account the wavefront aberration.
◦The optical design of the beam expander is an air gap configuration that does not use an adhesive to bond the lenses. This allows the beam expander to be used with a high-power laser.
◦It is designed and coated to enable to use in a broader wavelength range than the current models.
◦By turning the diopter ring that is attached to the center of the beam expander, you can make variable beams such as the focused beam, collimated beam, and the divergent beam. It is used when you want to vary the position of the beam waist and if strict collimation adjustment is necessary.
▶We provide the laser beam expander holders (KLH-BE) for optical axis adjustment of the laser beam expander.
▶The laser energy density at small aperture(output aperture) will become higher than LIDT when reducing the beam diameter and the Beam expander might be broken.
▶It may not be able to obtain the expected function when the beam expander is used in the opposite direction (reducing the beam diameter). Please refer the technical note of he laser beam expander for details.
|Material||Synthetic fused silica|
|Housing Finish||Black Anodized|
|Pointing||<0.5mrad (Reference value)|