Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
These vertical holders are ideal for small spacers due to their thin design and vertical adjustment. Holders can be positioned close to each other reducing optical system size.
◦There are two types, one is fitted with knobs on top (BSHL-2), and the other is without knobs and adjusted by hex wrench (BSHL-TF).
◦This product provides large clear aperture of transmitted beam even if beamsplitter is placed at 45 degrees.
◦The gimbal design maintains the center position of mirror even when fine adjusted.
◦Adjustment screws can be fixed with the clamp screws on the back of the mounts.
◦Two M4 mounting holes are also provided on both sides to mount the holder horizontally.
▶The locking clamps prevent the adjustment screws from rotating.
▶To adjust the BSHL-TF mounts, a hex wrench is required. A ball end wrench set (SKB-JBX6) is available.