Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
It is important to select a sample stage in accordance with the application in microscopy. This combination is suitable for fixing and observing glass slide samples with a low magnification objective lens (the objective lens holder is selected according to the objective lens used from M25x0.75, M26x0.706 or M20.32x0.706).
Please refer as the main part of the upright and inverted microscopes.
1) 1-axis coarse manipulation: The sample holder (or objective lens holder) is operated and screwed to the small aluminum guide (OBS-120G) for focusing with low magnification objectives.
2) Sample fixation: A glass slide size sample can be fixed to the sample holder. It can be used with both upright and inverted microscopes by changing the direction of the small aluminum guide (OBS-120G) after fixation.
3) CU-100 is compatible with Nikon objective lenses with M25x0.75 mounting screws.
CU-101 is compatible with our objective lenses with M20.32x0.706 mounting screws or Olympus' objective lenses.
CU-102 is compatible with our M26x0.706 mounting screw or Mitutoyo's objective lens.
▶Please contact our sales for consultation of the optical system using CoreUnit etc.
▶This is an example of a set of individual parts. Please assemble by yourself. In order to use it as a microscope, other products, including objective lenses, are also required.
▶The specifications of the assembly examples are subject to change without notice.
▶Do not over-tighten the small aluminum guide, as it may cause damage or malfunction.