SIGMAKOKI

Register


C60-TG
Installation
Zoom

It is a target plate used for optical axis adjustment of the cage system.

◦ Four dedicated rods are used in the cage system to attach various kinds of components along the optical axis.
There are three types of cage systems, including the original size of □32mm corner arrangement (C32 series) which uses 6mm diameter rods, □30mm corner arrangement (C30 series) and □60mm corner arrangement (C60 series). Furthermore, there are fourth type of cage system, which is the □16mm corner layout (C16 series) which uses a dedicated 4mm diameter rod that allows for further miniaturization.
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera.

Related product
Products
Technical Data
Documents/Downloads
Guide

▶Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog.
▶For consultation of optical system using cage system please contact Sales.

Attention

▶If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders.
▶Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder.
▶When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration.

Common Specifications
Primary materialAluminum
FinishBlack Anodized
Outline Drawing
■C60-TGP-32

Zoom
■C60-TGH-32

Zoom
How to fix side-in type holder plate

Zoom

①Rotate the holder plate using the rod as a fulcrum. (An arrow on the holder plate indicates the fulcrum)
②Make sure that the two rods fit into the end of the slot on the holder plate.
By tightening the set screws, the holder plate is fixed to the rod (cage).
③By attaching the fourth rod, it will be able to slide the holder plate along the rod without coming off.

Part Number

Catalog PDF

dxf

STP

IGS

SAT

C60-TGP-32

C60-TGH-32

Spec
Compare
Part Number
Add to cart Cart
    JP Yen Stock Qty
C60-TGP-32NEW
C60-TGH-32NEW

φ6mm (60x60mm)

φ1mm

φ7~32mm (5mm steps)

-

0.026kg

φ6mm (60x60mm)

φ1mm

φ7~32mm (5mm steps)

Slots fit from the side of rods

0.025kg

RoHS  

¥2,300

LOW
RoHS  

¥3,000

IN STOCK