Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Carriers are designed to mount on large optical rails (OBA-LH) or large low-profile optical rails (OBT-LH/LUU). They freely slide on the rails and can be locked in place.
◦The CAA-80LF is designed to be attached to the bottom of a large optical rail for direct clamping to an optical vibration isolator or laboratory bench.
◦The CAA-100LC is designed to assemble large optical rails at right angles to each other.
▶Friction-reducing tape is applied to the carrier surfaces that will be in contact with optical rails. Use as-is without removing the tape.