Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
The filter that can simulate the sensing of a human eye which is similar the silicon pixel detector sensor with a wavelength located at a peak at the NIR range. It is also widely as a filter attached to a CCD sensor.
◦Use the filter to correct the unnatural color taken with an IR camera.
◦The CCF5000 can be used in natural environment or outside, the surface of the filter is tough and hard to burn.
◦The CCF 500 and CCF 5000 have the same characteristics until 900nm, above 900nm the transmittance is different.
◦The color of the ECM-500 is darker than the CCF-500 and CCF-5000 and is fit for use to cut off the NIR light.
▶We can produce custom sizes, please contact our Sales Division with your request.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶The absorption wavelength range can not be used with high power laser and high energy pulsed laser.
▶There is no coating on both surfaces of the filter resulting in about a 10% transmission loss.
▶The ECM-500 and the CCF-500 are less resistance for an outside environment use and burn or smoke easier than the CCF-5000 over time.