Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
A cylindrical achromat is single component made by bonding two cylindrical surface lenses having different refractive indexes. The resulting achromat creates fine lines close to the theoretical limit. The cylindrical achromat is recommended if blurred lines and color bleeding is a concern when using cylindrical plano-convex lens (CLB-P).
◦It is designed so that difference of focusing point is reduced as much as possible in the visible light range.
◦Optical adjustment is easy to do as direction of the condenser line will be parallel to the side of the diameter (B).
◦It can be used as a substitute for a slit spectrograph.
▶Different focal length and diameters not mentioned on-line or in our catalog are available as a custom product upon on request.
▶Cylindrical lens holder (CHA) is available for mounting the achromatic cylinder lens. W4022
▶There is a direction of the incident parallel light with achromatic cylinder lens. The radius of curvature is allowed to be incident parallel light from the side of (the surface indicated by arrows) small curvature surface. If it is incident parallel light from the opposite side, condensing line will be thick.
▶In the generatrix direction (B direction), there is no characteristic to reduce the effect of achromatic, reducing aberration, and for collecting light.
▶If it is incident line beam source into achromatic cylindrical lens, parallel light does not come out. It will diverge in the direction of the generatrix (B direction).
▶In order to focus the fine beam line, it is necessary to enter the lens a parallel beam of high quality.
|Design wavelength||Blue: 486.1nm, Green: 546.1nm, Red: 656.3nm|
|Cement||Ultraviolet cure adhesive|
|Laser Damage Threshold||0.3J/cm2 |
(Laser pulse width 10ns, repetition frequency 20Hz)
|Surface Quality (Scratch-Dig)||60-40|
|Clear aperture||90% of actual aperture|