Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
The principle of the cold mirror is reflecting the visible range light and leave the UV range light to transmit. It can separate the visible and the UV (heat) of the sunlight.
◦Low absorption with a dielectric multi-layer coating using high transmittance glass material and it can be resistant to rapid change in high temperature.
◦Using this product it is possible to select IR light only.
◦Can be used as a NIR filter by changing the angle of Incident.
▶B270® is a registered trademark of SCHOTT AG Inc.
▶Different size, wavelength and deviation ratio not mentioned on-line or in our catalog are available as custom products upon on request.
▶For a suitable filter holder, please contact our Sales Division.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Do not use cold mirror with high power laser and high energy pulsed laser. We can provide dichroic filters (TFMHP) suitable for use with pulse lasers, please contact our Sales Division.
▶The backside of the cold mirror is not coated with AR, please use the dielectric coating side for visible light incident. The backside may have 10% of loss of energy and the ghost image may occur.
▶The visible light is reflected, the UV (heat) is transmitted, avoid blocking the transmitted light by a reflective element which may hold the heat.
▶The reflecting light may be mixed with infrared if the incident angle is other than 45 degrees.
|Material||B270® (White Glass : CLDM-50S) or BK7|
|Wavelength Range||400 - 2000nm|
|Surface Quality (Scratch-Dig)||80-50, (60−40 : CLDM-50S)|
|Clear aperture||Circle of 90% of the diameter or Circle inscribed in a square of 90% of the dimensions|