Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Cube beamsplitters with dielectric multi-layer coated on the hypotenuse face of a 45° right angle prism. Divides beams at reflected light (R): transmission light (T) ratio of 1:2 or 1:3.
◦Anti-reflection coating (AR coat) is applied to the incident and outgoing faces.
◦The dielectric multi-layer films has virtually zero light absorption and very low light intensity loss. However, transmittance and reflectance may change according to wavelength, polarization and incident angles.
◦In contrast to plate type half mirrors, cube mirrors have no ghosting or transmission optical path deviation.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
▶For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division with your requests.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Input beam from the prism side is indicated by a “○”(hypotenuse coated side).
▶The transmission curve on the graph is based on actual measurements and may vary from different production lots.
▶Phase retardation of inputting light will not be preserved. Please use waveplate for phase compensation.
▶Use only non-polarized light or circular polarized light as incident light for dielectric multi-layer coated beam splitters. Using polarized light may result in R:T ratios that vary according to polarization components.
▶Dielectric multi-layer coated cube half mirrors sometimes do not function effectively. If this should occur, first check the polarization characteristics of the light source (laser) and keep in mind that lasers used in the semiconductor field emit a linear polarized light.
|Surface flatness of substrate||λ/4|
|Wavelength Range||400 - 700nm|
|Coating||Hypotenuse surface ; Dielectric multilayer coating |
Rear surfaces ; Multilayer antireflection coating
|Polarization of the incident||Unpolarized light or 45-degrees Linear polarization or Circular polarization|
|Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)|
|Surface Quality |
|Clear aperture||Circle that inscribed in a square of 85% of the dimensions|