Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Dielectric cube half mirrors consist of two right angle prisms. One of them is coated with dielectric multi-layer partial reflection coating on the hypotenuse face.
◦Half mirror divides input beam into reflectance and transmittance at a 1:1 ratio. A beamsplitter with R:T (1:1 ratio) is called “Half Mirror”.
◦Four surfaces of the cube are coated with multi-layer anti-reflection coatings.
◦The loss of input beam is minimized as there is no absorption from dielectric coating. However the reflection to transmission ratio of these dielectric cube half mirrors vary depending on wavelength, polarization and the incident angle of input beam.
▶Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
▶For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Input beam from the prism side is indicated by a “○”. Reflection and refraction over wavelength will differ when light input is applied from the opposite side of the prism.
▶The transmittance curves are based on actual measurements and may vary with manufacturing lots.
▶The surface flatness is the reflected wavefront distortion of the surface before coating.
▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
|Surface flatness of substrate||λ/4|
|Coating||Hypotenuse surface ; Dielectric multilayer coating |
Four surfaces ; Multilayer antireflection coating
|Divergence ratio |
(reflectance : transmittance)
|1 : 1|
|Polarization of the incident||Unpolarized light or 45-degrees Linear polarization or Circular polarization|
|Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)|
|Surface Quality |
|Clear aperture||Circle that inscribed in a square of 85% of the dimensions |
(Circle inscribed in a square of 80% of the dimensions , in case of 5 and 7mm)