Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
We will fabricate custom substrates to your request of shape, size, reflected wavefront and transmitted wavefront with high precision. Production of large-diameter optical grade polishing to 300mm diameter maximum is available. We can also provide special processing, such as drilling hole or rectangular shape.
◦A data of transmitted wavefront measurement or reflected wavefront by the interferometer is provided.
◦We offer a selection of substrates made from various low-expansion material suitable to the required accuracy and environment of your use.
◦Thin film coatings are also available on the master optics. However, depending on the type of coating it we may not be able to guarantee the surface flatness.
▶Optical flats (HMPQP / HMPZP) that has been standardized by the reflecting surface flatness are available.
▶Optical flats (OFPXP) with surface flatness of λ/10 and less φ150mm are available.
▶Surface flatness may not be guaranteed if coating is applied to master optics.
▶Due to the difficulty in procurement of the materials and processing conditions, lead-time may be longer, please check with our Sales Division for accurate delivery.
▶If the holder is fixed to the master optics, by tightening screws too strongly, or the use of curable adhesives the surface flatness may be reduce on the master optics.
|Thickness||50 - 38mm (The approximate 1/6 to 1/8 of the diameter)|
|Clear aperture||90% of the diameter|
|Material||Synthetic fused silica , Low expansion glass|
|Surface flatness||λ/10 (Vary in thickness and outer diameter.)|