Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
FAC collimated lens is an aspheric cylindrical lens designed for collimating the bar-type laser incident and to avoid light divergence. Because of the aspheric form of the lens, it offers a low spherical aberration.
◦Because of its short back focus feature, it can be used with the light emitting section attach to the lens to perform the best focusing effects.
◦Can also be used as a light capturing lens for line CCD sensor or as a laser line generator.
◦Both sides have AR coating which limits the lost in illumination and have high focusing efficiency.
▶The pricing varies depending on the quantity of the order, please contact our International Sales Division.
▶We accept low quantity order.
▶The perfect collimated light can be obtained only with the type of high power Laser Diode Array light (TEM∞).
▶The back-focus (bf) is extremely short, the CAN type LD or LD with cover glass may face bad focusing problem.
▶There is no focus effect on the long side of the lens; therefore, divergence problem may remain.
▶The imaging points of the emitted light from the cylindrical lens are different from the vertical and the horizontal side.
|Material||High refractive Refractive index lanthanum barium glass|
|Refractive index||1.812 ( at 808nm )|
|Numerical aparture (NA)||＞0.8|
|Clear aperture||90% of the dimension of plane|