Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Ground glass diffuser has a large area diffusion of an incident light. It is widely used in prevention of imaging of lamp filament, to diffuse a large area of projected light or used as a screen.
◦The ground glass diffuser with sandblasted surface at a grit range from #240 to #1500. The higher the grit number the finer the sandblast size.
◦BK7 for visible and NIR and for Ultraviolet we recommend Synthetic fused silica substrates.
▶Ground glass on both surfaces or specific custom size substrates are available, please contact our Sales Division with your request.
▶The characteristic graph shown below is just a reference measurement and is not a measured result of our products.
▶Use the sandblast surface for screen application. The backside may have 4% reflectivity and it may cause a ghost imaging phenomena.
|Material||DFB1: BK7 DFSQ1: Synthetic fused silica|
|Surface condition (Front surface)||Sand blasted surface at various sand number range|
|Surface condition (Rear surface)||Polished (Surface flatness: about 4λ)|
|Wavelength Range||DFB1: 400 − 2000nm |
DFSQ1: 200 − 2000nm
|Clear aperture||90% of the diameter|