Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
It is achromatic lens having a negative focal length. By setting the concave one bonding two lenses wavelength dispersion of the refractive index is different, can be smaller than the spherical single lens and spherical aberration and chromatic aberration.
◦It is optimized focal length shift is small in the visible light range, the aberration is minimized.
◦It can be the beam expander of Galileo type in combination with achromatic lens with a focal length of the positive.
▶For custom focal lengths and diameter sizes not listed on-line or in our catalog please contact our Sales Division.
▶There is a direction to the incident parallel light to the achromatic lens. A surface with a small radius of curvature is allowed to be incident parallel light from a rear surface (the surface on the arrow is pointing to). When it is incident parallel light from the opposite side, spherical aberration and chromatic aberration will occur.
▶When used in the visible region, spherical aberration and chromatic aberration increases. In addition, the transmittance decreases.
|Design wavelength||486.1nm, 546.1nm, 656.3nm|
|Cement||Ultraviolet Hardened Adhesive|
|Laser Damage Threshold||0.3J/cm2|
|Surface Quality (Scratch-Dig)||40-20|
|Clear aperture||90% of actual aperture|