Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Dove prisms have the useful property that they completely invert an image by 180 degrees. If the prism is rotated about its axis the image will rotate at twice the rate of rotation of the prism. Dove prisms provide the most convenient and most precise method of rotating a beam and their long length and square profile make them easy to mount in a cylindrical sleeve. Because of the very limited field of view dove prisms need to be used with collimated or near-collimated beams. These prisms are offered with and without a broadband multilayer anti-reflective coating on the end faces. The hypotenuse face acts as a TIR surface and is therefore normally not coated. It is important, therefore, to keep this surface clean.
◦Dove prisms uses a precision fabrication process to ensure minimal light incident axis deviation.
◦We are offering high surface flatness at λ/4 for laser experimental use.
▶AR coating on incident surface and emitting surface and aluminum coat on lower surface can be done as an option. Please consult our Sales Division for coatings suitable for your application.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶When the prism is in the upright image position, the right and left side images exhibit mirror symmetry.
▶The chromatic aberration may happen when observation of image at high magnification through the dove prism.
▶The D side dimension is to the theoretical sharp edge. Actual measurement may be smaller due to the chamfer.
▶The bottom uncoated surface should be clean of all dirt to minimize being displayed in the image.
|Material||BK7 (Refractive index nd＝1.517)|
|Coating||DOP-4 : Uncoated|
DOP-4M : Broadband multi-layer AR coating (400-700nm)
|Surface Quality |
|Effective beam incident diameter||Circle that inscribed in a square of 90% of the dimensions A and B|