Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Basic optical table with excellent cost performance, setting a compact aluminum honeycomb breadboard (FB) on a simple table frame.
◦Suitable for various measurements when vibration isolation is not required.
◦The bench utilizes lightweight and high stiffness aluminum honeycomb breadboard.
◦The top surface of the bench is magnetic stainless steel plate, with tapped holes (M6 25×25mm matrix) over the entire surface allowing both magnetic type and screw fixing type systems or equipment to be mounted.
◦The table frame is designed for efficient use of wide space, and has high storage capacity.
◦Due to the light weight, it can be used confidently in places where the floor load limit is low, and because casters and adjuster bolts are standard equipment, it can be moved indoors easily.
▶We can produce sizes not listed in the catalog. Contact our International Sales Division for more information.
▶The thickness of compact aluminum honeycomb breadboard (FB) is 50mm when ordered separately, but the bench thickness of this product is 48.7mm. (W6013)
▶Flat board and table frame are joined directly, without rubber in between.
▶Because of the weight, delivery cost will be quoted separately.Use the carry-in route and installation environment question sheet. (W6001)
|Bench Structure||Aluminum honeycomb sandwich structure|
|Bench Material||Upper plate:magnetic stainless steel plate, thickness 5mm|
|Bench Top Surface||M6 tapped holes on 25×25mm matrix over the entire surface (leaving 25mm around the edges)|
|Bench Top Surface Finish||Unpainted (satin finish)|
|Trestle Table||Steel square pipe welded integral construction|
With casters and adjuster bolts