Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Two-axis pinhole style holders for optical fibers with FC connector.
◦Two types of actuators are available; the screw type (FOP) provides simple adjustment suitable to multimode fibers, and the coarse/fine screw type (FOP-DM) which is capable of fine adjustment required for single mode fibers.
◦The FOP-1 has a two-axis adjustment mechanism.
◦The FOP-2 has four axes of adjustment providing tip and tilt as well as X and Y adjustments.
◦The FC receptacles of FC type fiber optics holders can be replaced with the receptacles for SMA type fiber holders (FOP-ADP-SMA) or mini-fiber optics holders (MFH-ADP-3).
▶Two-axis pinholes/objective holders for SMA connectors (FOP−SMA) are also available.
▶We can change the post length. Please specify the post length when you place an order, then we will deliver the product after replacing the post with one with your specified length. Because those fiber optics holders use a special post, replacement of the post is at your expense.
▶The design of the standard FC receptacle includes a stop that the end of the fiber ferrule rests against. This positions the tip of the fiber 1.5mm from the end face of the receptacle. If it is necessary to align the end of the FC ferrule with the end face of the holder, use the connectors for FC type fiber optics (FLAD).
▶Detaching and reattaching the fiber will likely result in the fiber needing realignment.