Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
This is a special polarizer with minimal transmission loss, and a high extinction ratio below 5×10-5 is obtained. It is used in high-precision polarization experiments. The Calcite can be used in the visible to the infrared region, and α-BBO crystal type usable in the ultraviolet region are available.
◦Glan Thompson prism is housed in a metal frame, and no stress is applied to the inner element when frame is mounted in the holder.
◦Calcite type Glan Thompson prism are available in two acceptance angles.
◦A single-layer anti-reflection coating has been applied on the surface of the Glan Thompson prism to provide high transmittance.
▶Glan laser prism for high-power laser (GLPB / GLP) and Wollaston prism (WPPB / WPPC) are also available.
▶If you need uncoated Glan Thompson prism or anti-reflection coating with specific reflectance, please contact our Sales Division with your request.
▶A change in the incident angle may also change the extinction ratio of the linearly polarized transmitted light.
▶Separation angle will vary depending on the wavelength. Please confirm the wavelength characteristic graph for separation angle.
▶Because of natural calcite crystals, there are individual differences, and variations in quality.
|Material||α-BBO , Calcite|
|Angular deviation of beam||＜3′|
|Transmitted wavefront distortion||λ/4|
|Coating||Both surfaces ; MgF2 single-layer antireflection coating|
|Laser Damage Threshold||0.3J/cm2 (Laser pulse width ; 10ns )|
|Surface Quality (Scratch-Dig)||20-10|
|Material propreties||Aluminum ( Finishing ; Black Anodized)|