Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Damp-proof storage cabinets, suitable for storing optics such as lenses, mirrors, and prisms, and optical hardware at a controlled humidity.
◦Humidity can be controlled with humidity adjuster. (+/−5 − 7%RH)
◦Humidity inside and outside of the Dry Cabinet can be checked with digital dual hygrometer.
◦Photo catalysis is applied to shelf-sheet, which reacts to in-room visible light, also decomposes and removes bacteria, virus and smell.
◦Electrical outlet equipped on rear side top right corner (general-use power supply: up to 100V 500W)
◦Our standard Dry Cabinets are intended to use in 100V. Please contact us when you used outside of Japan.
◦Load capacity per shelf plate is 490N (50kgf).
▶Read the Instruction Manual carefully before use.
▶It is not possible to moisten, heat, or cool the interior of the dry cabinet.
▶Place cabinets on a level surface protected from direct sunlight.
▶Place in a dry location protected from sources that may cause temperature fluctuations (e.g., air conditioner) and moisture.
▶The cabinet gradually reduces humidity by repeating dehumidification and regeneration automatically. It does not dehumidify rapidly.
▶Storage of paper or corrugated paperboard may result in increased humidity.
▶Never store inflammable chemicals.
▶The dry cabinet prevents mold generation and proliferation. It will not remove mold once it has grown.
|Material of Cabinet||Steel plate (0.8t) Melamine baking coating||Steel Finishing ; Baked melamine|
|Steel Finishing ; Baked melamine|
|Door Material||PVC framed transparent tempered safety glass||Steel, Glass||Steel, Glass|
|Door-Shutting Method||Magnet (with rubber)||Magnet rubber, with handle||Magnet rubber, with handle|
|Humidity Control||Dial type automatic dry unit||Digital controller||Digital controller|
|Hygrometer||Renge ; 20-90%RH、Accuracy ; ±5%RH||Renge ; 0.0-99.9%RH、Accuracy ; ±3 - 4.5%RH||Renge ; 0.0-99.9%RH、Accuracy ; ±3 - 4.5%RH|
|Power Supply||100V (50/60Hz)||100V(50/60Hz)||100V(50/60Hz)|
|Accessories||Two keys, Caster with front wheel stopper (only PH-155W/H-155WD-M2)||Two keys||Two keys|