Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
It is a substrate polished to high precision were material change of the shape is very small due to the temperature variation. It can be used as test plates of the interferometer and the Newton test plate.
◦Inspection data of interferometric surface accuracy is provided with the optical flats.
◦You can select the required optical flat from our range of products listed by various sizes and surface accuracy.
◦In the high-precision and large size optical flats, a material having a lower thermal expansion than synthetic fused silica is used.
◦Arrow on the side of the component indicates the surface that is polished to the high surface accuracy.
◦Optical flat are delivered in case for storage.
▶Zerodur® is a registered trademark of SCHOTT AG.
▶CLEARCERAM® is a registered trademark of Ohara Corporation.
▶Wedge substrates are also available that can be used to prevent the influence of back reflection (WSB / WSSQ / WSSQK).
▶When used as a Newton test plate, it may scratch the sample if used improperly. If inspecting an object that is easily scratched, use a laser interferometer.
▶The number of Newton rings is approximately twice the value of the PV result of analysis by interferometer.
▶Optical flats are not coated in order to maintain the surface accuracy. If you need a coating, please contact to our Sales Division.
▶If there is a crack or chipping visible on the edges of an optical flats, the damage may have reduced the surface flatness. Please do not use damaged optical flats as they should be replaced.
▶A Newton ring is a rainbow-colored fringes that can be observed when the sample is adhered with optical flat. It is possible to estimate the flatness of the sample surface from the shape and number of this fringes.
|Material||Synthetic fused silica |
Low Expansions glass (ZERODUR® or CLEARCERAM®-Z)
|Surface Quality |
|Clear aperture||95% of the diameter|