Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
High Surface Accuracy Mirrors are realized by optimizing the conditions of the substrate material, thickness and coating. A surface accuracy of λ/10 after coating is guaranteed on these mirrors.
◦This product features a surface accuracy (after coating) higher than our standard dielectric multi-layer flat mirrors (TFM).
◦By using synthetic fused silica and increasing the substrate thickness the rigidity of the mirrors are increased.
◦Our product line includes mirrors with high-reflection for use in individual wavelengths including ultra-violet,YAG and other lasers.
▶These mirrors are available mounted in a holder with surface accuracy guaranteed (HTFM-MHG), contact our Sales Division to assist in your selection.
▶Please contact our Sales Division for customized products. (customized on outer diameter, wavelength characteristic, etc.) Please use the inquiry sheet.
▶Please refer to here for Wavelength Characteristic Data (Reference Data, EXCEL file format).
▶Surface accuracy data is not provided standard with the product. Please contact our Sales Division for this data at an additional charge.
▶For the dielectric multi-layer film, the reflection rate wavelength characteristics vary depending on the polarization state of the incident beam. The reflection rate of P polarization is lower than that of S polarization and the reflection band is narrow.
▶The reflectance specifications are represented by the average of the reflectance of P polarized light and S polarized light.
▶If the product is used without setting the angle of incidence to 45 degrees, the reflection may decrease.
▶If the product is not used at an applicable wavelength, the reflection rate may decrease.
|Material||Synthetic fused silica|
|Coating||Dielectric multi-layer coating|
|Surface flatness after coating||λ/10|
|Surface Quality (Scratch-Dig)||10−5|
|Clear aperture||80% of the diameter|