Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Cylindrical Laser mounts for use with vibration isolated Rod Mount system. The dampened structure makes the holders ideal or use in holograms or interferometry.
◦Cylindrical lasers of φ25.4 to φ45mm diameter fit in the V-grooved section and are held in place by a single clamping screw.
◦Holders can be mounted at any position by sliding along the damped rod.
◦Can be directly mounted on a vibration isolator or optical breadboard with 50×50mm matrix M6 screw holes or 1/4-20 UNC holes on 2” spacing.
◦LAHU-A mounts can adjust beam tilt and rotation.
▶Consult our Sales Division if holders with an optical axis height of 300mm or higher is necessary.
▶The holder may slide due to its weight when changing the height. Be careful not to drop the holder when adjusting.
▶Lasers are very delicate instruments. Pushing in a fixing screw with excessive force sometimes deteriorates the laser performance.
|Strut||Material :Stainless steel Finish: None|
|Holder material||Material: Aluminum Finish: Black Anodized|