Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Beam expanders are useful laser accessories when the beam diameter must be increased. However, their main function is to decrease the divergence of the laser beams which are to be projected over long distances. These precision beam expanders have been designed for use with He-Ne lasers but they can be used for any laser working in the visible part of the spectrum (400 − 700nm).
◦Laser beam expanders designed to use with high powered lasers that are made of lenses attached together without using glue (air-gap).
◦These beam expanders are light weight and short bodied and because they are Galileo type design, they have little aberration and correction.
◦The visible type can be mounted directly to any He-Ne laser.
▶For wavelength or magnification which is not shown on-line or in the catalog, please ask our Sales Division.
▶We provide the laser beam expander holders (KLH-BE) for optical axis adjustment of the laser beam expander.
▶Make sure that the beam expander is well aligned with the laser light axis. If the beam expander is inclining, the output light will also be inclined.
▶It is not possible to obtain a decreased beam diameter by using the beam expander on the opposite side. Use it properly to obtain an adequate optical solution.
▶The light may not be collimated when it become divergent or convergent.
|Housing Finish||Black Anodized|