Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Optics, such as filter can be fixed with lens holder by mounting the filter case on the lens holder.
◦Filter case can be mounted with or dismounted from lens holder while the lens is mounted on lens holder.
◦Mountable diameter of optics is as same as the diameter of the lens holder’s compatible optics diameter.
（Except for LHGC-10 and LHGC-15）
◦Multiple filter cases can be jointed when the same diameter filter cases (dimension E) are used.
◦It allows to use as a filter mount to arrange the combination of the filters.
▶No resin rings are attached. Please use resin rings (DR) to protect filters from the scratches.
▶It can be mounted on two axis lens holder (LHCM) Catalog Code/W4512or three-axis/five axis lens holder (ALHN) Catalog Code/W4016 and allows to align a lens to the optical axis.
▶A simple, standalone filter holder (FHS/FH) is also available.Catalog Code/W4043
▶Filter case may not be mounted on lens holder when the thick lens is fixed on the lens holder.
▶The thread depth must be 3mm or deeper to mount the filter case with lens holder.