Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Adapter for fixing objective lenses on 5-axis lens holder (ALHN-5RO) or φ50mm lens holders.
In combination with the LHO-20.32-N or LHO-20.32A-N, objective lenses the thread type of which is M20.32 can be fixed.
◦Using with 5-axis lens holders (ALHN-5) enables lens rotation and tilt adjustment not limited to centering and focusing.
▶Criss-cross type lens holder (TAT-16 or TAT-30) and its objective lens adaptor (TAT-180A) for objetive lens center adjustment is available. (W4514)
▶Adapter for objective lens itself cannot mount the objective lens. Please also purchase LHO-20.32-N or LHO-20.32A-N.
▶f you can not dismount the objective lens holder from the adapter, please install pins in the hole on side of the adapter and dismount it with firmly holding the adapter.
▶There is possiblity that the mounting screw will be tight when you use other company's objectives even if its thead type is the same.