Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
The elastic modulus of the optical tweezers is easily determined by recorging the positional fluctuations of the captured beads with a high-speed camera and analyzing with a dedicated software.
◦The analysis software consists of two types of software: center of gravity quantification software and elastic modulus calculation software.
◦The elastic modulus is calculated from image data acquired by a high-speed camera.
◦The software is easy to use without the expensive equipment.
▶In order to run the analysis software, a PC with a separate software package (free of charge) installed is required.
▶High-speed camera, USB 3.0 cable (2.0m), camera holder, analysis software are sold as a set. You can download the software from our website.
▶Please refer the online manual for operating the analysis software. website.
▶The sample file for the operation check is enclosed with the analysis software.
▶Please prepare your own PC. (supported OS: Windows10®, external port USB3.0 port is required)
▶It can be used with the Optical Tweezer EDU, Optical Tweezer Mini or Micromanipulation Systems.
▶The measurement range is limited to about 0.1 pN/nm for 1 mm diameter beads..
▶The measurement results should be a reference values..
▶The power of the incident beam should be set to 200mW or less (referenced at 1064nm).
|Part Number||Product Name||Quantity|
|DMK33UP1300||High Speed Camera||1|
|UC-050||C-mount Camera Holder||1|