Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: firstname.lastname@example.org
The stock availability for this product is limited at the moment. Please contact the sales team for more information at email@example.com.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at firstname.lastname@example.org. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : email@example.com
Light Pipe is an optical element for the illumination of uniform brightness distribution from a light having a non-uniform brightness distribution. It is used for the illumination optical system for image processing, and for converting the Gaussian profile to a top-hat profile.
◦It uses a hexagonal prism with higher uniform efficiency than a rectangular prism.
◦We offer a compact 30mm and higher homogeneity 75mm products.
◦There are two materials BK7 for the visible to near-infrared region and synthetic fused silica for ultraviolet light.
◦Distance of opposite sides are available in two types of 5mm and 10mm.
▶Dedicated adapter (LPH-ADP) is available to mount the light pipe to the lens holder and the mirror holder.
▶Since it is totally reflected at the side, reflectance may get worse if fingerprints and dirt are on the side surfaces and may also cause an unevenness in the brightness distribution of the emitted light.
▶It can not be used in collimated light. Please use large incident light of collection angle (divergence angle)
▶Anti-reflection coating is not on both end faces and will have reflection (4%) of both end faces and transmittance loss of 7-8%.
|Coating||Uncoated (Including the sides)|
|Recommended incident numerical aperture (NA)||＞0.5|
|Surface Quality (Scratch-Dig)||60-40|