Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Unique right angle drives are direct replacements for micrometer heads used on OptoSigma's manual stages. Unidirectional control units are suitable for assembly into systems, offering excellent operability in confined spaces and improving work efficiency.
◦Compatible with the mounting brackets of micrometer heads used in products listed in the catalog.
◦Angled micrometer heads can be rotated and secured at any position. Adjust to the most convenient position depending on the situation.
▶Angled micrometer heads will be assembled onto a stage when purchased together. Contact the Sales Division if you need a certain orientation
▶The feed rate at the end of the micrometer is not 1:1, but is slightly less. The scale on the micrometer should be used as an estimate.
▶Depending on the stage type and installation angle of the micrometer head, there can be shortened travel or interference with mounting parts. Contact our
Sales Division when you swap the micrometer head.
▶MDC-6.5 requires a special nut driver (MNS). Contact our Sales Division for more information.