Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
This product is a high transmittance diffuser compared to the other products and we can obtain a wide diffusion light in a single direction. It is fit for fluid observation, used as a light panel and laser marking system.
◦The beam shaping diffuser is made of with many small lenses in random shape on its surface. The emitted light thru the small lenses form the beam into an ellipse shape. Light cannot cause a big light quantity loss by dispersion or a reflection in the irrelevant direction.
◦There is not necessary to adjust the light axis like a lens since the light incident can be projected anywhere on the beam shaping diffuser surface and an ellipse beam shape will be obtained.
◦When the optic is rotated, the ellipse shape will rotate too.
▶We offer this product without mount and in different size, contact our Sales Division with your requests.
▶We can produce the emitted light in circular distribution form.
▶Can be used for laser light but the diffused light can not be returned to one focused spot.
▶Clean the optics with appropriate lens cleaning alcohol or distilled water only.
▶The surface of the optics is extremely delicate, please avoid any contact with hard material or rub the surface.
▶The optics can be deformed or melt, please avoid using it with high power laser or high energy pulsed laser.
|Optics diameter||about 0.25mm|
|Wavelength Range||400 - 1100nm|
|Transmittance||85 − 90% (But it depend on the diffusion angle)|
|Angle tolerance||±15% (Scattering angle ＞10°) |
±1.5° (Scattering angle ≦10°)