Our stock products are being manufactured in our plants continuously in order to provide you a shortest lead time as possible.
In the following table you may find typical lead times. They may vary depending on quantity and raw material availability. Some products are having an interchangeable parts.
You will receive an accurate delvery date on your order confirmation after you ordered.
|Optomechanics||Average 2 - 5 weeks*|
|Optics||Average 2 - 5 weeks*|
|Motorized Stages||Average 3 - 6 weeks*|
|System||Average 3 – 6 weeks*|
*This is an average typical lead time. For more details, please ask to: email@example.com
The stock availability for this product is limited at the moment. Please contact the sales team for more information at firstname.lastname@example.org.
Estimated average shipping time is 2 - 10 working days. For urgent shipping please contact the sales team at email@example.com. Extra charges may applies.
At this time pre-manufactured parts are already available for a quick assembly.
The typical lead times is estimated at 1 - 3 weeks after your order, depending on quantity.
You will receive an accurate delivery date on your order confirmation after you ordered.
For more details, please ask to : firstname.lastname@example.org
Holders for mounting an optical bare fiber and for fine adjustment.
◦Come equipped with a small differential micrometer (graduated) for adjusting the criss-cross motion to provide 0.5mm coarse motion/rotation and 0.05mm fine motion/rotation, making them convenient for microscopic positioning.
◦The MFH-FOP-2 offers tilt adjustment (±2°) in two directions, in addition to fine adjustment in the criss-cross directions within the plane perpendicular to the optical axis.
◦While the applicable jacket diameter of the standard holders is 900 μm, those accommodating jackets 250 and 500 μm in diameter are also available.
|Jacket Diameter φB||900μm|
|Clad Diameter φA||125～250μm|
|Adjustment Range XY||±1mm|
|Coarse Resolution XY||0.5mm/rotation|
|Fine Resolution XY||0.05mm/rotation|